12W Muilt Color Laser System / PICO-12 Technical Parameters:
Parameter:
Power requirements: 110~230/50Hz (±5%)
Consumption: max. 400VA
Total optical output: 12W
Laser module:KVANT
Laser balance:
3W/637nm
4W/520nm
5W/445nm
Beam diameter: 6.5mm
Divergence: <0.8mrad for each color
Modulation: 0-5V analog, up to 100kHz TTL
Scanner Set:DT-50 50Kpps Max.60Deg
Input connector: ILDA IN DB25 male
Output connector: ILDA OUT DB25 female
Operation temperature:
-20℃ to 45℃ (Temp. Control System)
Size:462*307*263mm
Weight: 29kg
Feature:
1.Pico series: laser module entirely manufactured in Europe.
2.High quality laser module, unique design.
R/G/B (mW):3000/4000/5000.
3.Black paint Stretching aluminum housing
4.Self-developed laser ILDA-AMP has been pre-installed inside
5.The optical bench by suspension design
6.ILDA Standard, also DMX or SD-card controlled
7.Individual controller for brightness and X/Y size, easy setup and use the X/Y mirror.
8.Self-developing handle design, use it for hanging in any rotation angle, or portable.
The Pico-12 is a RGB laser animation projector,
suitable to small and medium venues or rental, some outdoor laser displays and
graphics as well.
Its’ all laser diodes module entirely manufactured in Europe,
for brighter more vibrant colors and longer lifetimes, give better beam effect compare with common Chinese-made
laser projector.
Upgraded the Pico-12 downsize the volume,
the greatly improve the radiating effect. In addition, we fix up the unique the
handle system making the hanging any rotation angle. The fixed handle using in
unique damping design, use it you can operate any rotation angle of projection. Beside the fully
sealed and IP67 waterproof section, it still can keep well function even in the
harsh environment.
Self-developed laser ILDA-AMP has been
pre-installed inside; it allows you to use longer ILDA signal lines to control,
interference and graphics jitter will not occur.
For the self-developed
temperature control system, the projector can operate at minus 20 degrees to
plus 40 degrees ambient temperature, and to have independent over-temperature
protection, you no longer need to worry about delicate laser because of
overheating and damage. The fan speed linear control by MCU, the projector will
function in quite while in the normal temperature.
Design for ILDA
Standard. But you also can control by DMX or SD-card player. You can
use the potentiometer to adjust the Laser projector output brightness
for each color and X/Y size. It have a very good design is the convert X/Y
button.Use it you can very fast to setup the X or Y image mirror.
Suitable case:
Small and medium venues
oudoor laser displays and graphics
Rental service
ANNOUNCEMENT: This kinds of landmark laser projector is self-developed by Supercan CO.,LIT, which is the only official certificated productions in mainland China.
Do not believe other websites false info; my company reserves the right to pursue legal action.
READ THE CERFICATE AND PETENT
KNOW MORE ABOUT LASER SHOW
Design for ILDA Standard. But you also can control by DMX or SD-card player. You can use the potentiometer to adjust the Laser projector output brightness for each color and X/Y size. It have a very good design is the convert X/Y button.Use it you can very fast to setup the X or Y image mirror.
Suitable case:
Small and medium venues
oudoor laser displays and graphics
Rental service
Do not believe other websites false info; my company reserves the right to pursue legal action.
READ THE CERFICATE AND PETENT
KNOW MORE ABOUT LASER SHOW
03.Jun 2019
